G Vehicle Detector Normal/Override On; G Talk/Page Release - Panasonic WX-C3010 Mode D'emploi

Masquer les pouces Voir aussi pour WX-C3010:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

G Vehicle Detector Normal/Override On

The Vehicle Detector operation can be set up.
Normal/Override On setup can be made by button operation
at the front panel of this unit.
When the Override On mode is set, the V/D Override indica-
tor of the center module will light in yellow. When the V/D
Override button is pressed, the Normal mode is assumed
and this indicator will disappear.
OPERATIONAL SETTING
SPEED
BEEP
OUTSIDE
TEAM
DAY/NIGHT
SP LEVEL
ON:DAY
ON:DAY
Vehicle Detector Normal/Override On Button
NORMAL: The vehicle detector turns on only when a vehicle
is detected at the menu board. When the detector turns
on, a beep tone is heard in the headset. When the Talk
button is pressed on the Order Taker or All-in-One
Headset side, the Outside Speaker and the Outside
Microphone are turned ON at the menu board.
When the vehicle leaves, the vehicle detector turns off.
When setting the normal position, Auto Talk Lock mode
is enabled.
OVERRIDE ON: The vehicle detector is always turned on.
When setting the override on position, Auto Talk Lock
mode is invalid.

G Talk/Page Release

In Talk or Page mode, any talk is temporarily interrupted at
the headset (Order Taker or All-in-One Headset).
Operation of Talk/Page Release is possible by button opera-
tion at the front panel of this unit.
OPERATIONAL SETTING
BEEP
SPEED
OUTSIDE
DAY/NIGHT
TEAM
SP LEVEL
ON:DAY
ON:DAY
Talk/Page Release Button
Notes:
• If POS Remote is set for ON, you have to note that no
button operation of the Talk or Page Release is possible
at the center module.
• It is impossible to release the Talk or Page mode of the
All-in-One Headset or Order Taker in the manager
mode.
V/DET
T/P
OVERRIDE
RELEASE
T/P
V/DET
RELEASE
OVERRIDE
15

Publicité

Chapitres

Table des Matières
loading

Table des Matières