Assembly - Vermeiren Interval Mode D'emploi

EN
3.3

Assembly

"
!
CAUTION:
the bed.
"
!
CAUTION:
You should obey the assembly instructions of your nursing bed as explained below.
3.3.1 Undercarriage
1. Position the frame with the steering castors on a smooth, level surface and lock the
castors by treading on the arresting levers.
2. Insert the hinged unit in such a way that the arresting bolts engage properly.
Protect the electric lead to the motor against damage by squashing.
3.3.2 Slatted Frame
1. Headrest (with transformer) should be placed in the black receptacles of the hinged
structure. The locking bolts of the slatted frame are for security.
2. Pull the foot-end with its rails from the rear over the rollers of the hinged unit.
3. Push the coupling tubes into each other and secure them on both sides with the
fixing screws.
4. Lay the slats on the guides and gently press them in to position.
"
Protect the electric lead to the motor against damage by squashing.
Chance of pinching - Do not place fingers between the components of
Risk of clamping - Keep fingers away from moving parts of the bed.
Interval, Interval 120cm, Interval 140cm
1 = Headrest with transformer
2 = Receptacles of the hinged unit
3 = Locking bolts
!"#$%&)%
2011-01
!