Stanley CL90i Mode D'emploi page 11

Applications
77-021
1. Plumb:
Using the vertical laser beam, establish a
vertical reference plane. Position the desired
object(s) until they are aligned with the
vertical reference plane to ensure object(s)
are plumb.
2. Level:
Using the horizontal laser beam, establish
a horizontal reference plane. Position the
desired object(s) until they are aligned with
the horizontal reference plane to ensure
object(s) are level.
3. Square:
Using either the vertical and horizontal
laser beams with or without the 90° vertical
reference laser beam, establish a point
where the vertical and horizontal beams
cross. Position the desired object(s) until
they are aligned with both the vertical and
horizontal laser beams to ensure object(s)
are square.
4. Pulse Mode:
Setting laser unit to pulse mode allows use
of optional laser detectors.
5. Manual Mode:
Disables self-leveling function and allows
laser unit to project a rigid laser beam in any
orientation.
11