Kärcher WD 3 Mode D'emploi page 15

Masquer les pouces Voir aussi pour WD 3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Care and maintenance
 Clean the appliance and accessory parts made of
plastic with a commercial plastic cleaner.
 If required, rinse the container and accessories
with water properly and dry them before reuse.
Illustration
 Only clean the cartridge filter under running water;
do not wipe or brush. Let it dry completely prior to
installation.
Troubleshooting
Decreasing cleaning power
If the cleaning power of the appliance deteriorates
please check the following:
 Accessories, suction hose or suction pipes are
clogged, please remove the obstruction using a
stick.
Illustration
 Filter bag is full, install new filter bag.
Illustration
 Cartridge filter is dirty, knock off dirt from cartridge
filter and clean under running water if necessary.
 Replace damaged cartridge filter.
Technical specifications
Mains voltage
Frequency
Output P
nom
Mains fuse (slow-blow)
Container capacity
Water intake with handle
Water intake with floor nozzle
Power cord
Weight (without accessories)
Sound pressure level
(EN 60704-2-1)
Subject to technical modifications!
10
EN
120 - 127
V
50 - 60
Hz
800
W
10
A
17
l
10
l
8
l
2 x 16 AWG SJT W
5,4
kg
75
dB(A)
15

Publicité

Chapitres

Table des Matières
loading

Table des Matières