Nice MhouseKit CL2SL Instructions Et Avertissements Pour L'installation Et L'utilisation page 46

LED P1 [D]
Off *
On
Series of quick flashes, from
1 to 4
5 quick flashes
1 slow flash
3 slow flashes
5 slow flashes
LED P2 [E]
Off *
On
1 flash per second
2 flashes per second
LED P3 [F]
Off *
On
1 slow flash
2 slow flashes
* or it could be in "Standby" mode
20 – English
Status
All OK
Memorisation in Mode 1
Memorisation in Mode 2
Cancellation OK
Dimensions/weight
Memorisation OK
Cancellation OK
Status
All OK
All OK
The device recognition phase has not been
carried out, or there are errors in the data
saved
Devices recognition phase in progress
Status
All OK
All OK
There is no memorised opening angle
Opening angles recognition phase in pro-
gress
Action
No Memorisation in progress
During memorisation in mode 1, it is normal for it to take a maxi-
mum of 10 s.
During memorisation in mode 2, it is normal for it to take a maxi-
mum of 10 s.
Completion of deletion of a transmitter
A command has been received from an unmemorised transmitter
Memorisation completed successfully
Deletion of all transmitters completed successfully
Action
"Slow" speed selected
"Fast" speed selected
It is possible that there are faulty devices. Check and if necessary
repeat the device recognition phase (see paragraph 9.3.3 "Rec-
ognition of other devices").
Indicates that it is in the process of recognising the attached
devices (this will take a maximum of a few seconds)
Action
Cycle operation
Complete cycle operation
Carry out the recognition phase (see chapter "3.5.2 - Recognition
of leaf open and close angles").
Indicates that the open angles self-learning phase is in progress