Chauvet Professional COLORdash S-Par 1 Manuel page 3

COLORdash S-Par 1 QRG
AC Power
Power Linking
AC Plug
DMX Linking
DMX Connection
Master/Slave
Connection
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
You can link up to 24 COLORdash S-Par 1 products at 120 V, 40 products at
208 V, or 45 products at 230 V. Never exceed this number. Power linking cords
can be purchased separately.
Connection
AC Live
AC Neutral
AC Ground
·
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product from power via breaker
or by unplugging it.
·
When using this product in an outdoor IP65 type environment, be sure
to use IP65 (or higher) rated power cables and secure unused ports
with attached IP65 covers.
The COLORdash S-Par 1 will work with a DMX controller using an IP65 rated
5-pin DMX serial
www.chauvetprofessional.com.
The COLORdash S-Par 1 uses an IP65 rated 5-pin DMX data connection for its
DMX personalities: 4Ch, 6Ch and 11Ch. See the User Manual for information
about connecting and configuring the product for DMX operation.
When using this product in an outdoor IP65 type environment, be sure to use
IP65 (or higher) rated data cables and secure unused ports with attached IP65
covers.
The COLORdash S-Par 1 uses the DMX data connection for its Master/Slave
mode. See the User Manual for information about how to connect and configure
the product for master/slave operation.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
connection. A DMX
3
Screw Color
Brown Yellow/Brass
Blue Silver
Green
primer is available
EN
from