Chauvet INTIMIDATOR SPOT 160 Guide De Référence Rapide page 3

Les langues disponibles

AC Power

This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.

To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

Power Linking

For the maximum number of Intimidator Spot 160 products that you can power link at each voltage, see the User Manual

or the sticker on the product.

Fuse Replacement

Disconnect the product from power.

Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.

Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

Re-insert the fuse holder and reconnect power.

Mounting

Before mounting this product, read the

Mounting Diagram

Mounting clamp

(such as CLP-15

from Chauvet)

Hanging

bracket

Control Panel Description

Button

Function

<MENU>

Exits from the current menu or function

<UP>

Navigates upwards through the menu list and increases the numeric value when in a function

<DOWN>

Navigates downwards through the menu list and decreases the numeric value when in a function

<ENTER>

Enables the currently displayed menu or sets the currently selected value into the selected function

Intimidator Spot 160 QRG Rev. 2

QUICK REFERENCE GUIDE

Safety

Notes.

Safety cable

(such as CH-05

from Chauvet)

Feet for floor

mounting (x4)