Product Overview; Application; Function; Storage - Helios ETR Instructions D'installation Et D'utilisation

Installation and Operating Specification ETR
• The safe isolation from the supply must be checked using a two-pole voltage detec-
tor.
The owner is obliged to ensure that the device is operated in perfect working order
•
only.
Electrical equipment must be checked regularly: Loose connections are to be re-
•
tightened and damaged lines or cables must be replaced immediately.
Never clean electrical equipment with water or similar liquids.
•
A separate fault and performance monitoring-system with an alarm signal function is
•
necessary in order to prevent personal injuries and material damages during malfunc-
tions and in case the device fails. Substitute operation must be taken into consider-
ation!

3 Product overview

3.1 Application

Temperature control for e.g.: extraction systems, warm-air heaters, air curtain installa-
tions, liquid-cooling, chillers.
Controlled output (0 - 10 V) e.g. for activating a speed controller for fans.
Fans with integrated controller and input 0 - 10 V can be activated directly.

3.2 Function

The measured actual value at the sensor is compared with the adjusted target value.
Output voltage and thus fan speed is controlled automatically depending on the adjusted
parameters.
Alternatively the device can be operated as temperature sensor. Output 0 - 10 V in this
mode proportional to the adjusted measuring range (max. -50...150 °C).

3.3 Storage

The device must be stored in its original packaging in a dry and weather-proof room.
•
• Avoid exposure to extreme heat and cold.
Avoid over-long storage periods (we recommend a maximum of one year).
•

3.4 Disposal / recycling

Disposal must be carried out professionally and in an environmentally friendly way in
accordance with the respective national legal stipulations.
Separate the materials by type and in an environmentally friendly way.
"
If necessary, commission a specialist company with the waste disposal.
"
L-BAL-E293-GB 1841 Index 001 Part.-No.
5/19
Product overview