ADEUNIS Sigfox Smart Building COMFORT Guide Utilisateur page 55

Sigfox Smart Building COMFORT - Guide utilisateur / User guide version V1.0.1
Procedure to follow to program its registers according to the chosen mode.
Periodic
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
I save each reading
I indicate 1 in my S320
register
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number
of readings that I want
in my frame in my
register S301 (3 being
the maximum possible
in Sigfox without losing
data)
Which mode do I want my device in?
Periodic
Alarm
What period do I want between each reading?
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
When do I save the information?
I want to scan regularly
for my alarm but I need
to save the information
every Y time
I indicate the Y value in
my S320 register
When will my frame be sent?
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number
of readings that I want
in my frame in my
register S301 (3 being
the maximum possible
in Sigfox without losing
data
set my thresholds S330
to S334 for temperature
and S340 to S344 for
humidity
DISTRIBUTED BY TEXIM EUROPE
+
Alarm on
exceeding
threshold
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
In alarm mode I do
not need to save the
information
I do not need to enter
a value in the S320
register
My frame is sent
when my threshold is
exceeded
I indicate 0 in my S301
register to disable the
periodic mode
I set my thresholds
S330 to S334 for
temperature and S340
to S344 for humidity
Page
FR
EN
55 of 85