Weighing; Turn Off; Tare Function; Timer Function - CASO DESIGN I10 Mode D'emploi

3.3 Weighing

Keep waiting until LCD show 0, put the object on the platform, and keep record after the
number shows stable.

3.4 Turn Off

Keep press ON/OFF key for two seconds to turn off the scale

3.5 Tare Function

Put the container of the object on the platform of the scale, then the LCD will show the
weight of the container. If the weight of container is lighter than 100 g, press the TARE
key, the data will change to 0.
Then the data will change to 0.
Then put the object into the container and the scale will show the net weight of the objects.

3.6 Timer Function

Keep press Timer key for 1s to enter timer mode, LCD shows 00:00 then and the first
number on the left become flashing, press ON/OFF key one time and the first letter will
change from 0 to 1 as shown below, press Timer key to confirm and the second latter
become flashing.
Use the same way as shown in step 1 to select the second and other numbers you
wanted, 10:30 for example, means that you set 10 minutes and thirty seconds as your
target time.
Press the Timer key to confirm, then the scale will start countdown and the beep.

3.7 Time Adjustment

Keep press Time key for 1 s to enter time adjust mode, LCD shows the timer you already
have and the first two letters become flashing.
Reset the time according to you local current time by ON/OFF key for plus UNIT key for
decrease, and press TIME key to confirm and then do the same to local current time for
the minutes.
caso Waage I10
If the weight of the container is heavier than 100 g, there
will be a symbol ZEICHEN show on the left bottom (>T<).
12