auna IR-120 Mode D'emploi page 22

Configuration
Network
• Wireless Network Configuration
Press "Enter" to scan for wireless network and list out.
Wireless Network Configuration (WPS): This is the option for you to use WPS function, which means you can set
the wireless without enter any passwords for Wi-Fi protected if your router has the function.
Date & Time: Current Date & Time setting: You can press UP/DOWN for parameter setting, and move cursor with
LEFT/RIGHT and press ENTER to confirm.
• Time Format setting: 12hours / 24hours
• Date Format setting: YY/MM/DD, DD/MM/YY or MM/DD/YY
• Daylight Saving Time (On / Off)
• GMT: Set the currently time as GMT
Alarm Clock (Switch 2 separate alarms on/off)
• Alarm Clock types
You can ENTER your favorite Alarm setting for every day, once or particular day in the week.
• Alarm Clock NAP function
If you would like to take a nap or need the Alarm in short time, you can use this function. You can ENTER the time
from 5 minutes up to 180 minutes. No Snooze function available for the NAP alarm.
• Alarm Sounds setting (Beep/Melody/Internet Radio) Please note: The NAP Alarm will only with beeping sound.
• When the Alarm Clock goes on, press any key except for "Power" button, to enter the "Snooze" mode. You can
press POWER ON/OFF to stop the ringing when the alarm goes on 5 minutes later again.
Remark. You can ENTER any internet radio station as Alarm tone from the favourite station. When the internet sta-
tion does not work in 1 minute, it will auto set into Beep.
Scheduled playing: You can set the start and stop time for playing, and then the product can play the channels stored
in the preset on time and end at the set time.
Language: English /Deutsch / Espanol / Francais / Portugese / Nederlands / Italiano / Pyccknn / Svenska Norske /
Dansk / Magyar /Cesky /Slovensky / Polski / Turkce / Suomi.
Dimmer: You can adjust the backlight of the LCD with below settings:
Power saving - backlight level
Turn On - backlight level
Sleep Timer
You can set the timer to put the radio on standby after certain time elapsed, from 15 minutes to 180 minutes with the
step of every 15 minute.
You also can do the setting with the "Sleep" button from remote control, when you press "Sleep", then you can see the
sleep timer on the top right corner of the display.
Buffer: ENTER your preferred buffering time.
Local Radio Setup
The radio will detect your local area stations automatically and it will display under the "Internet radio" you will find all
the stations under "Internet radio" -> "Local Radio".
22