Endress+Hauser Memograph M RSG40 Manuel page 36

Commissioning and operation
36
5.4.6 Setup directly at the unit (using keys/navigator)
Key functions in the setup
The function of the operating keys is described in the fields directly above the corresponding
keys on the screen. Free fields mean that no function is currently assigned to the keys in
question.
• Press the navigator; the main menu is displayed
• Using the navigator, select the "Setup" menu
• Press the navigator again to confirm your entry
• Use the softkey "Help" to call up the Help on the entry selected.
• The "Cancel" or "Back" softkey cancels entries or returns to the previous screen.
NOTICE
‣
Every parameter is modified via a dialog box.
‣
The modified settings do not take effect until you return to the normal operating mode
by pressing "Back" repeatedly (confirm setup is accepted with "Yes"). Until this time, the
unit still works with the previous data.
Procedure for unit configuration/setup:
System settings (language, date/time, communication, safety, etc.)
Application settings (limit values and alarm relays - if necessary)
NOTICE
After commissioning (unit setup), the SD card and the internal memory should be cleared to
delete the temporary setup data!
‣
Deleting the SD card: Extras -> SD card -> Delete
‣
Deleting the internal memory: Main menu -> Diagnosis / Simulation -> Delete internal
memory
Start
↓
↓
Inputs (universal inputs: signal type, input range, etc.)
↓
Inputs (digital inputs: function, designation, etc.)
↓
Inputs for mathematics channels (option)
↓
Outputs (relay or analog/pulse outputs - if necessary)
↓
↓
Application settings (signal grouping, text, softkeys)
↓
End