How To Make Pasta - Keimling Naturkost Green Star GS-3000 Mode D'emploi

Green Star™ - The Health Juicer

How to Make Pasta

26 Pasta guide
24 Pasta screen
Assembling the Green Star™
Health Juicer to make pasta
1. Attach the twin gear housing onto the
motor housing.
2. Instead of the twin gears (6), insert the
pasta screw (27) into the left side as far as
it will go (on the left when you are looking
at the housing from the front)
3. Slide the pasta guide (26) over the pasta
screw (27) so that the opening is facing
up.
4. Put the pasta screen (24) on.
5. Close the latching arms (11) and tighten
them.
6. The machine is now ready to make pasta.
7. Make sure that the pasta dough is not too
moist.
Tip: At the beginning of and during dough-
making, add some salad oil like olive oil
into the chute. Possible unpleasant noises
will disappear quickly then, and the dough
slides through the inset better.
56
27 Pasta screw
Pasta recipe to be eaten raw
1. Steep barley (from natural food shop or
health food shop) for at least 6 hours.
2. Insert the homogenising blank (17) (with
opening facing down) into the Green Star™
Health Juicer.
3. Season the barley with salt and soy sauce
(mix in spinach juice for green colour, car-
rots for red colour).
4. Install the pulp discharge casing and close
the outlet adjusting knob. Let the mixture
run through the Green Star™ Health Juicer.
Roll the dough into a ball.
5. Add flour if dough is still too moist.
6. Run the dough through the pasta screen
and inset of the Green Star™ Health Juicer
a second time.
7. Without cooking, serve with herbs, tomato
sauce, etc.