Blaupunkt AMSTERDAM 290 BT Mode D'emploi Et De Montage page 33

Installation
4
Fix a cable with a commercial item of tape.
NOTE
• Swap the clips if necessary.
Removing the trim plate
Pull the trim plate forward.
01_AMSTERDAM 290_1
Removing the unit
1) Remove the trim plate by referring to step 1 in
"Removing the trim plate".
2) Insert the extraction key (accessory 2 ) deeply into
the slot as shown. (The protrusion at the tip of the
extraction key must face toward the unit.)
3) With the inserted extraction key secured, insert the
other extraction key into the slot.
4) Pull out the unit halfway.
NOTE
• Be careful to avoid injury from the catch pins on the
extraction key.
5) Pull the unit all the way out with your hands, being
careful not to drop it.
2
2
16
08.04.2019