Maintenance; Troubleshooting - Costway ES10113US-WH Manuel De L'utilisateur

Maintenance

Cleaning: before cleaning and maintenance, turn
off the machine and unplug the plug.
1. Clean the surface
Clean with surface of machine with a wet soft cloth. Don't use
chemicals, such as benzene, alcohol, gasoline, etc.; otherwise,
the surface of the air conditioning will be damaged or even the
whole machine will be damaged.
2. Clean the filter screen
If the filter screen is clogged with dust, and the effectiveness of
the air conditioning is reduced, be sure to clean the filter screen
once every two weeks.
2.1: Clean the upper filter screen frame
1) Clasp the wedging block of the EVA filter screen frame with
hands. Force down from the outside to remove the EVA filter
screen frame. Unscrew four screws fixing the EVA filter screen
and the rear housing to remove the EVA filter screen (as shown
in the above figure) .
2) Put the EVA filter screen into warm water with neutral
detergent (about 40℃ / 104℉) and dry it in the shade after
rinsing clean.
14
Unit Storage:
1: Unscrew the drainage cover, unplug the water plug, and discharge
the water in the water pan into other water containers or directly tilt
the body to discharge the water into other containers.
2: Turn on the machine, adjust it to low-wind ventilation mode, and
maintain this state until the drainage pipe becomes dry, so as to keep
the inside of the body in a dry state and prevent it from mildewing.
3: Turn off the machine, unplug the power plug, and wrap the power
cord around the wrapping post; install the water plug and the
drainage cover.
4: Remove the exhaust pipe and keep it properly.
5: Cover the air conditioning with a plastic bag. Put the air
conditioning in a dry place, keep it out of the reach of children, and
take dust control measures.
6: Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all
machine components properly.

Troubleshooting

Do not repair or disassemble the air conditioning by yourself.
Unqualified repair will cause damage to users or their properties.
Problems Reasons
There is no electricity.
The air
The overflow indicator
conditioning
displays "FL".
does not
work.
The ambient temperature is
too low or too high
Solutions
Turn it on after connecting it
to a socket with electricity.
Discharge the water inside.
Recommend to use the
machine in at the
temperature of
7-35 ℃ (44-95 ℉).
15