Installation And Adjustment - Costway ES10113US-WH Manuel De L'utilisateur

Installation and Adjustment

1. Installation:
Warning: before using the mobile air conditioning,
keep it upright for at least two hours.
The air conditioning can be easily moved in the room. In the moving
process, ensure that the air conditioning is in the upright position
and the air conditioning should be placed on a flat surface. Do not
install and use the air conditioning in the bathroom or other humid
environments.
1.1 Install the pipe assembly (as shown in Fig.1): screw the pipe
assembly (exhaust fitting end) into the exhaust port on the rear
panel.
06
Fig.2
Fig.1
Fig.3
1.2 Install the window sealing plate assembly
1) Half open the window, and mount the window sealing plate
assembly to the window (as shown in Fig.2 and Fig.3); the assembly
can be placed in horizontal and vertical direction.
2) Pull various components of the window sealing plate assembly
open, adjust their opening distance to bring both ends of the
assembly into contact with the window frame, and fix various
components of the assembly.
1.3 Install the body
1) Move the machine with installed pipe and fittings to the window,
and the distance between the body and walls or other objects shall
be least 50cm/20" (as shown in Fig.4).
50cm/20"
2) Elongate the exhaust pipe and snap the flat end of the exhaust
pipe joints into the hole of the window sealing plate assembly (as
shown in Fig.5 and Fig.6).
Notes:
1. The flat end of the exhaust pipe joints must be snapped into
place.
2. The pipe cannot be distorted nor has substantial turning (more
than 45 °). Keep the ventilation of the exhaust pipe not blocked.
50cm/20"
Fig.4
07