Publicité
Les langues disponibles
Les langues disponibles
8760423
INJECTION PRECAUTIONS
Fluid can penetrate the skin at 100 PSI pressure. Fluid escaping under pressure
from the device has sufficient force to penetrate your clothing and skin. Follow
the precautions below to avoid an injection injury.
1.
Always check for leaks wearing a face shield, safety goggles, rubberized
gloves and protective clothes.
2.
Release all pressure from the system before you inspect it.
3.
Do not use your hands to detect a fluid leak. Use a large piece of wood,
cardboard or paper and watch for discolouration.
4.
Replace damaged parts with identical manufacturer's components to
ensure it is rated to handle the pressure.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the device safety rules. If you use
this device unsafely or incorrectly, you can suffer serious personal injury.
WARNING! Ensure that the load is secure and centered on the device. Do
not allow the load to move or tilt as the device may kick out causing
injury to the operator and/or cause the load to fall.
1.
Use the correct device for the job. This device was designed for a specific
function. Do not modify or alter this device or use it for an unintended purpose.
2.
Do not use the device if any parts are damage broken or misplaced. Repair
or replace the parts.
3.
Do not exceed the maximum capacity to prevent equipment failure
or damage.
4.
Always place the device on a hard, level surface capable of supporting the
load. Allow enough clearance around the device and the load for movement.
5.
Inspect the device before each use. Do not use if it is bent, cracked,
damaged or has been subjected to a sudden or unexpected (shock) load.
6.
Ensure that all applicable pins, bolts and nuts are firmly tightened
before using.
7.
Do not place your hands between moving components.
8.
Once the load is lifted to the desired height, support the load with jack
stands to prevent injury should the jack fail. Do not work under a load
that is supported only by a jack.
6
22 Ton Pneumatic Service Axle Jack
For technical questions call 1-800-665-8685
V4.0
Publicité
