Special Features - Austroflamm UNO BACK Manuel D'instructions

Uno Back 8 english
Accessories
You can obtain floor plates of glass or steel, care products or the Heat Memory System for heat storage
from your certified dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely.
The fireplae must not be amended.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and
inspected for deposits every year – if necessary more often, e.g.
after the cleaning of the chimney.
Residues of ash and soot on top of the baking compartment can be
swept into the firebox left or right through the cleaning opening (x)
at the rear.
The chimney also has to be cleaned regularly by the
chimneysweeper. Your chimneysweeper will inform you of the
necessary inspection intervals. An expert should inspect the stove
annually.
5. SPECIAL FEATURES Uno Back
Operation with external air supply
Uno Back can be operated with an external air connection. If the combustion air is being supplied directly to the
furnace by an air-tight pipe including closing mechanism from the outside, then the stove may be used in
residential property with mechanical ventilation.
If the stove in being used like that, a multiple stove installation on the same chimney is forbidden.