Publicité
Les langues disponibles
Les langues disponibles
Thermal Fuse Protection
Your Tracker vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector. This thermal protector is designed to
protect your vacuum cleaner from overheating due to a cutoff in airflow (i.e. clogged hose, operating the vacuum without a bag).
Should this situation occur, the thermal fuse protector will safely shut off your vacuum cleaner to avoid any potential damage.
To reset the thermal fuse:
1.
Unplug the vacuum cleaner.
2.
Check for problem (over-filled bag, clog in hose, clogged filters, etc.).
3.
Correct problem.
4.
Locate "tripped" fuse — the small red button located on the bottom of the back side of the main body (roughly one inch
to the right of the left wheel).
5.
Using a pencil, paper clip, or other pointy object, push the reset button.
6.
Plug vacuum cleaner in and begin using.
For Best Performance
•
Keep machine and all accessories clean and in good operating condition.
•
Change vacuum bags and filters as recommended to maintain optimum cleaning efficiency.
•
Always use genuine vacuum bags, filters and parts, as use of other products may result in poor cleaning or filtration
performance. Our filtration products are designed for maximum performance.
•
Have machine checked periodically by a qualified vacuum technician.
•
Store machine carefully in dry area.
•
For optimum cleaning performance and safety, follow your Owner's Manual and keep it for future reference.
9
Publicité
