Dustbane Tracker Manuel De Pièces Et D'opérations page 6

Connecting the hose assembly
to the vacuum cleaner:
Open the lid located on the back side of the vacuum cleaner and
insert the plastic end of the hose assembly into the cleaning
attachment opening. Then connect the curved wand to the
hose assembly (Fig. 3).
On-Board Tool Cleaning
These vacuums are equipped with on-board cleaning tools
including a metal telescopic power wand, stretch hose, dusting
brush and a crevice tool.
1. To use the cleaning tools, lift the hose handle straight
up from the vacuum (Fig. 4).
2. Extend the wand by pulling the button back and
pulling the smaller wand out of the larger wand (Fig. 5).
3. Attach any of the on-board tools to the end of the
wand or if you do not need the wand, any tool can
be connected directly onto the hose handle.
6