Publicité
Les langues disponibles
Les langues disponibles
Filters
Your vacuum cleaner is equipped with a secondary and a HEPA filter. These filters capture fine
dust particles and protect the motor from dirt. Accumulated dirt in the bag compartment
will be collected on this filter and may restrict motor performance. It is important to change
the filters regularly — approximately once a year, or as needed.
To Change the Secondary Filter
1.
Unplug the vacuum cleaner. Remove the bag compartment cover
and remove the bag.
2.
Remove the secondary filter and replace with a new filter (Fig. 5).
3.
Replace the bag and bag compartment cover.
NOTE: Neither of the filters can be washed and reused.
To Change the HEPA Filter
1.
Unplug the vacuum cleaner. Remove the bag compartment cover.
2.
Remove the HEPA filter from the front of the bag compartment (Fig. 6).
3.
Insert a new filter and replace the bag compartment cover.
Edge Cleaning Feature
For best results when cleaning carpets near walls and stationary furniture, place the right side of the vacuum nozzle along the
wall or furniture.
Automatic Self-Adjusting Rug Nozzle
The Tracker upright vacuum cleaner is designed with an Automatic Self-Adjusting Rug Nozzle. No manual adjustments are
required. The height of the rug nozzle is instantly and automatically adjusted to carpet pile height. This self-adjusting feature
allows the rug nozzle to float evenly over all carpet pile surfaces.
5
Publicité
