Lexmark 310 Serie Mode D'emploi page 41

Reinserting the print cartridge
1
Remove the print cartridge. See page 31.
2
Insert the print cartridge. See page 32.
3
Print your photo again.
Wiping the print cartridge nozzles and contacts
1
Remove the print cartridge. See page 31.
2
Dampen a clean, lint-free cloth with water and place it on a level
surface.
Note: Place two pieces of paper under the cloth to avoid
3
Gently hold the nozzles against the cloth for about three seconds,
and then wipe in the direction shown.
4
Gently hold the contacts against another clean section of cloth for
about three seconds, and then wipe in the direction shown.
getting ink on the work surface.
41