Lexmark 310 Serie Mode D'emploi page 46

Error Message
Card problem
No images
Card format
PictBridge
port
Size warning
What it indicates
The memory card was
inserted incorrectly or is
damaged.
A second memory card has
been detected.
The memory card has no
supported images.
The memory card formatting
is not supported.
The device attached to the
PictBridge port is not
supported.
The PictBridge-enabled
digital camera is not set to
the correct USB mode.
The paper size selected
does not match the size of
the photo paper in the paper
support.
46
Solution
1 Verify that there is no
damage to the memory
card.
2 Insert the card correctly.
See page 12.
Only one memory card may
be used at one time.
Remove the second card.
Use a different memory card
containing photos.
Reformat the memory card
in your digital camera.
For help, see your digital
camera documentation.
1 Remove the device.
2 Use a PictBridge-enabled
digital camera in the
PictBridge port.
Refer to your digital camera
documentation for help
selecting the correct USB
mode.
Verify the printer setting
matches your blank paper
size. See page 22.
Note: An index page can
only be printed on 4 x 6
photo paper.