Warranty / Disposal / Technical Change - Sonnenkonig DOLMEN 3 Mode D'emploi

• FAN SURFACE
Please gently wipe the surface which a clean soft cloth you can use a mild detergent
after diluted with wet cloth to wipe the fan surface,then wipe with a soft dry cloth If the
fan surface is dirty
• AIR INLET, AIR OUTLET
EN
Use a soft brush to clean the opening around the air outlet, alternatively, lightly run a
vacuum cleaner nozzle (soft brush) over the air outlet to remove any debris that may
have accumulated inside.
• REMOTE CONTROL
Wipe the remote control surface gently with a dry, soft cloth. remove the battery inside
of remote control If it is not used for a long time
• POWER PLUG
Please clean the power plug with a dry soft cloth
• STORAGE
Place in a large plastic bag for dust protection.Please avoid to put in the shaking places
and nearby electrical appliances with refrigeration/heating function.Please store the fan
in the clean and dry place. Please place it where children can't touch it.

6 Warranty / Disposal / Technical change

Warranty
The Products are controlled just before delivery. If despite a lack of your product, try trust-
fully your seller. Please bring your receipt, as this is to be submitted for each warranty. The
guarantee period is 24 months from date of purchase.
Disposal
The device must be disposed of properly. The device can be distributed free of charge for
disposal at each dealer.
Technical changes
Reserving technical changes in technology and design
CE Declaration of Conformity
This device complies with the following standards
EMC EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
LVD
EN 60335-2-80: 2003 + A1: 2004 + A2: 2009
EN 60335-1:2012/A13:2017
EN 62233: 2008
RoHS
2015/863/EU
EMC 2014/30/EU
LVD 2014/35/EU
38