Publicité
Les langues disponibles
Les langues disponibles
Install Vertical Angle Posts
Determine desired height of VersaRac from
11
Ceiling to bottom of the overhead rack.
18"
or
27- 42"
Note:
Storage space will be 3" shorter than the full height
of the VersaRac
Bolt vertical angle posts to ceiling angle brackets with the large end of the keyslot on top
13
using a 1/4" x 3/4" bolt, a 1/4" lock nut and two 1/4" washers for each post. Vertical angle
posts should be orientated so that they form the corners of the VersaRac.
Note:
Vertical Angle Post on the left will be installed on opposite sides of the ceiling angle brackets from the right.
12
Left Side
If desired height is greater than 18",
Bolt an 18" vertical angle post to a 27" post with
two 1/4" x 3/4" bolts, two 1/4" lock nuts and four
1/4" washers. Use one bolt on each side of the
post with keyholes in the same direction.
Repeat for the remaining vertical angle posts.
Right Side
Minimum
3"
Overlap
9
Publicité
