Newage VersaRac Mode D'emploi page 8

Depending on the VersaRac size and orientation as
determined on page 6, measure 48, 72 or 96" from
7
the installed ceiling mounting angle to determine the
location of the second ceiling mounting angles.
48, 72 or 96"
Note:
Ceiling Mounting Angles must be measured from
the same end of the bracket.
9
Depending on the VersaRac size and orientation that best suits your application, measure 48, 72 or 96" from
the installed ceiling mounting angles to determine the location of the remaining ceiling mounting angles
Repeat steps 1 - 4 to install the
10
remaining ceiling mounting brackets in
the same orientation.
48, 72 or 96"
8
Repeat steps 1 - 4 to install the second
8
ceiling mounting bracket in the same
orientation as the first.
48, 72 or 96"
48, 72 or 96"
Note:
Measure ceiling
mounting angles
from the same side
of bracket.
Note:
If the spacing of your ceiling joists
does not match the preferred
assembled size and direction of
your VersaRac installation you will
need to install a joist in the correct
position.
Please refer to "Installing a Joist
Hanger" on page 12 to install a
ceiling joist in the desired position.