Publicité
Les langues disponibles
Les langues disponibles
Assemble and Install Perimeter Beams
Bolt together Long Perimeter Beams A and B at the desired 6' or 8' (72" or 96") length assembly.
14
Use four 1/4" x 3/4" bolts and 1/4" lock nuts with eight 1/4" washers per assembly.
6' Assembly
Note:
To reduce sag, tighten the bolts on the
top of the beams first followed by the
bolts on the front of the beams.
8' Assembly
Install both short perimeter beams into
15
the bottom of the vertical angle posts. Use
a rubber mallet to align the rivet nubs with
the bottom of the keyholes.
10
1
st
2
nd
Install both long cross beam assemblies
16
into the bottom of the vertical angle posts.
use a Rubber mallet to align the rivet nubs
with the bottom of the keyholes.
1
st
2
nd
Publicité
