Publicité
Les langues disponibles
Les langues disponibles
Plan the Installation Location
Determine if your VersaRac will be installed parallel or perpendicular to the direction of
1
your ceiling joists. Use a stud finder to locate the joists if ceiling is finished with drywall.
Parallel
2
Check the spacing of your ceiling joists to ensure that they will work for the size and direction of
your VersaRac Install. If the spacing of your joists is 24" there should be ceiling joists located in the
necessary position.
Measure from center to
center of ceiling joists
Parallel
1
48"
For a parallel installation ensure that
the ceiling joists are 48" apart.
6
Perpendicular
Note:
If the spacing of your ceiling joists does not
match the preferred assembled size and direction
of your VersaRac installation you will need to
install a joist in the correct position.
Please refer to "Installing a Joist Hanger" on page
12 to install a ceiling joist in the desired position.
Perpendicular
72" / 96"
For a perpendicular installation ensure that the ceiling joists
are 72" or 96" apart depending on the VersaRac configuration
that best suits your preferred assembled size.
Publicité
