Explanation Of The Information Placard On The Device - IKRA IBF 25-1 Mode D'emploi

Explanation of the information placard on the device

1 2
10
16
1. Warning!
2. Read the operating instructions before use!
3. Wear eye/head protection and hearing protection!
4. Wear sturdy footwear!
5. Wear protective gloves!
6. The distance between the machine and bystanders must be at least 15 m!
7. Watch out for objects being ejected at high speed.
8. Fire hazard! The fuel is flammable and therefore may not be spilled. Do not work next to open flames. Do not
smoke. Only refill fuel when the motor is cool and is not running.
9. Maximum cutting device speed. Only use suitable cutting devices.
10. DANGER OF INJURY ! Warning! Do not put hands under the cover of the machine when it is running.
Caution! Rotating electrical too!
11. ATTENTION: HOT SURFACE
12. Guaranteed acoustic capacity level L
13. Danger of flying objects!
14. Keep third parties out of the area of risk.
15. Push the fuel pump 6 times
16. Petrol and oil are flammable and may explode. Fires, naked flames and smoking are prohibited.
17. Confirms the conformity of the power tool with the directives of the European Community.
18. Beware of blade thrust. When using metal cutting tools (thicket blade) there is the danger of kickbacks if the tool
gets in touch with some solid object.
EXPLANATORY SYMBOLS ON THE MACHINE (if present)
EXPLANATORY SYMBOLS ON THE PROTECTION DEVICES (if present)
GB | Operating Instruction
3 4
11 12
17
WA
Fuel tank
Engine stop switch positions
a = stop/Off
b = run/On
Choke
Primer
Cutting device rotation direction
5 6
13 14
18
GB-2
7 8
15
9