Instructions On Environmental; Dispose Of Batteries In An; Disposing Of The Transport; Repair Service - IKRA ARM 4037 Manuel D'utilisation

Instructions on environmental protec-
tion / disposal
The disposal instructions are provided on picto-
grams that are applied to the device or the pack-
aging.
In accordance with European Directive
2012/19/ EU on Waste Electrical and
Electronic Equipment and its application
in national law, used electrical devices
must be collected separately and sent for envi-
ronmentally friendly recycling.
Do not dispose of electrical devices in
household waste.
Recycling alternative to the obligation to return:
As an alternative to returning the device, the
owner of the electrical device is obliged to assist
with recycling it properly when relinquishing own-
ership. The used device can also be handed over
to a disposal point where it will be disposed of
as defined by the national recycling management
and waste disposal act.
This does not apply to accessories and aids that
do not contain electrical components, which are
supplied with the used devices.
Dispose of batteries in an environmentally
friendly manner
• Li-ion batteries are subject to disposal
regulations.
• Batteries must be removed from the de-
vice before it is scrapped.
• Have any defective battery disposed
by a specialised shop.
• Any damaged or disposed devices
must be delivered to appropriate coll-
ection centres.
Disposing of the transport packaging
The packaging protects the device from transport
damage. The packaging materials are generally
selected from environmentally friendly and waste
management perspectives and are therefore re-
cyclable. Returning the packaging to the mate-
rial flow saves raw materials and reduces waste.
Packaging (e.g. film, Styropor®) can be hazard-
ous to children.
There is a risk of suffocation!
Keep packaging out of the reach of children and
dispose of it as quickly as possible.
GB | Operating Instructions

Repair service

Repairs to electrical tools may only be performed
by an electrician. Please describe the fault that
you have encountered when sending the ma-
chine in for repair.

Spare parts

If you need accessories or spare parts, please
contact our Service department. When working
with this tool, do not use any accessory parts
other than those recommended by our company.
Otherwise the operator or others in the vicinity
could suffer serious injuries, or the tool could be
damaged.
When ordering spare parts, provide the following
information:
• Device type
• Device article number
Battery 40 V / 2,5 Ah Art. no. 17180829
Charging station
Blade

Warranty conditions

We provide the end consumer with following
warranty for this electrical tool, regardless of the
dealer's obligations contained in the purchase
contact:
The warranty time is 36 months and begins
when the device as handed over; this must be
documented by the original purchase receipt. If
the device is used for commercial purposes or
rental, the warranty time reduces to 12 months.
The warranty does not cover wear parts, batteries
and damage caused by using incorrect acces-
sories, repairing using non-original parts, using
force, blows and breakage, as well as wilful motor
overloading. Replacement under warranty only
applies to defective parts and not to complete
devices. Repairs under warranty may only be
carried out by authorised workshops or by the in-
house customer service department. Third-party
repairs render the warranty invalid.
The purchaser is liable for postage, shipping and
subsequent costs.
20
Art. no. 17180984
Art. no. 77003150