Télécharger Imprimer la page

Jenn-Air JGC9536 Guide De L'utilisateur page 7

Masquer les pouces Voir aussi pour JGC9536:

Publicité

Les langues disponibles

Les langues disponibles

C
OOKTOP AT A
G
LANCE
MODEL JGC9536
1 2
3
1. Left rear surface simmer burner (5,000
BTUs on Hi, 650 BTUs on Lo).
2. Left front surface burner (9,200 BTUs).
3. Center surface burner (17,000 BTUs).
4. Right front surface burner (12,500
BTUs).
5. Right rear surface simmer burner (5,000
BTUs on Hi, 650 BTUs on Lo).
MODEL JGC9430
1 2
1. Left rear surface burner (10,500 BTUs).
2. Left front surface simmer burner (5,000
BTUs on Hi, 650 BTUs on Lo).
3. Right front surface burner (15,000
BTUs).
4. Right rear surface burner (9,200 BTUs).
S
EALED
The sealed burners are secured to the
cooktop and are not designed to be re-
moved. Since the burners are sealed into
the cooktop, boilovers or spills will not
seep underneath the cooktop.
However, the burners should be cleaned
after each use. The head portion of the
burner has a removable cap that is easily
removed for cleaning. (See page 8 for clean-
ing directions.)
4 5
Burner caps must be correctly placed on
the burner base for proper operation of the
burner.
H
P
IGH
B
URNER
There is one high speed burner on your
cooktop, located in the center (select mod-
els) or right front position. This burner
offers higher speed cooking that can be
used to quickly bring water to a boil and for
large-quantity cooking.
NOTES:
A properly adjusted burner with clean ports will light within a few seconds. If using
3 4
natural gas, the flame will be blue with a deeper blue inner cone.
If the burner flame is yellow or is noisy, the air/gas mixture may be incorrect. Contact
a service technician to adjust. (Adjustments are not covered by the warranty.)
With LP gas, some yellow tips on the flames are acceptable. This is normal and
adjustment is not necessary.
With some types of gas, you may hear a "popping" sound when the surface burner
is turned off. This is a normal operating sound of the burner.
To improve cooking efficiency and to prevent possible damage to the cooktop or
pan, the flame must be adjusted so it does not extend beyond the edge of the pan.
B
URNERS
ERFORMANCE
*
6
S
B
IMMER
URNERS
These burners are located in the left and
right rear positions (select models) or the
left front position. The simmer burner of-
fers a lower BTU flame for delicate sauces
or melting chocolate.
* BTU ratings will vary when using LP gas.
B
G
URNER
RATES
The grates must be properly positioned
before cooking. To ensure proper posi-
tioning, align bumpers on grate bottom
with the locators in the cooktop.
Do not operate the burners without a
pan on the grate. The grate's porce-
lain finish may chip without a pan to
absorb the heat from the burner
flame.
Although the burner grates are durable,
they will gradually lose their shine and/or
discolor, due to the high temperatures of
the gas flame.
*
4

Publicité

loading

Ce manuel est également adapté pour:

Jgc9430