Petsafe PWF00-13665 Manuel D'utilisation page 15

4. To program the Receiver Collar to either mode A or mode B, press and hold the (-) button and then press
the (+) button for approximately 5 seconds. Programming is complete when you hear a series of three
beeps from the Receiver Collar.
5. Once the Receiver Collar has been programmed, press the (+) button to turn the Barrier Transmitter ON.
Check to make sure the black bar(s) appear on the LCD screen indicating the mode you have selected (5B)
and reset the Barrier Transmitter to the desired range.
5B
www.petsafe.net 15