Troubleshooting - Petsafe PWF00-13665 Manuel D'utilisation

Barrier Transmitter does not
appear to work.
Barrier Area range is too low.
Barrier Area range is too high.
Pet seems to receive
no stimulation.
Unable to hear
Receiver Collar tone.
No segments on
Barrier Transmitter.
18

Troubleshooting

• Check segment indicator on Barrier Transmitter.
• Check/replace batteries in Barrier Transmitter.
• Increase the Barrier Area range on the Barrier Transmitter.
• Check that the Barrier Transmitter setting corresponds to the Receiver
Collar setting. (i.e. Barrier Transmitter is set to mode A and Receiver Collar
is synchronized to pick up mode A)—refer to Additional Features section
beginning on page 12 for instructions.
• Check/replace batteries in Receiver Collar.
• Adjust Barrier Transmitter range to increase Barrier Area size.
• Adjust Barrier Transmitter range to decrease Barrier Area size.
• Check/replace batteries in Receiver Collar.
• Use Test Light Tool to check for static correction.
• Check Receiver Collar fit to ensure Contact Points have direct skin contact.
• Check the setting on the Barrier Transmitter.
• Check/Replace batteries in Receiver Collar.
• Pets easily hear tone but it may be a volume level that is difficult
for you to hear.
• Use the Test Light Tool to check Receiver Collar for static correction.
• Press the (+) button.
• Check/replace batteries in Barrier Transmitter.
Customer Care Center 00 800 18 18 20 20