Troubleshooting - Tineco PURE ONE AIR VS14 Serie Mode D'emploi

Troubleshooting

Problem
The appliance
does not turn on
Weak suction
power
Rapidly blinking
red
Slowly blinking
red
Solid red light
Battery won't
charge
Abnormal motor
sounds
Note:
If the above troubleshooting guide fails to provide a solution, please visit
our website www.tineco.com for further support.
Possible cause
No power
Auto protection for
overheating
The appliance is
blocked (i.e. the tube,
suction mouth or some
other parts)
Dustbin and filters are
full
The mesh filter is not
installed
The appliance is
blocked (i.e. the tube,
suction mouth or some
other parts)
Brush roller tangled
Air channel blocked
Low power
Dust sensor blocked
The adaptor is not
designed for this
appliance
The adaptor is not
correctly inserted
Poor contact during
charging
The appliance is
blocked (i.e. the tube,
suction mouth or some
other parts)
35
Solution
Charge the battery
Restart after cooling
down
Check and remove
blockages
Clean the dustbin and
filters
Install the mesh filter
Remove blockages
Clean the brush roller
Remove blockages
Charge the battery
Remove blockages
Use the original adaptor
Reinsert the adaptor
correctly
Check the appliance is
correctly placed
Remove blockages