Auto-Provisioning - Telecom Behnke 20-0040-IP Mode D'emploi

Auto-provisioning

3.
With auto-provisioning, you can have your SIP
door intercom station automatically set-up.
Any of the parameters accessible via the web
front-end including telephone books can be
set-up using auto-provisioning. Behnke's SIP
door intercom supports two types of auto-pro-
visioning:
1. Fully automated via DHCP option 66. To do
so, option 66 is configured on the DHCP server,
at the location where you find the configura-
tions file.
Behnke's SIP door intercom supports down-
loads via http, https or ftp-servers.
www.behnke-online.com
Additional SIP door bell / SIP PA system connection
An example for a valid option 66:
ftp://192.168.30.2/behnke/
This folder needs to contain a file with the
following file name:
<MAC Address>.txt
with <MAC Address> being a MAC address in
hexadecimal encoding; like it is shown in the
web front-end under "Status" but without the
colons.
2. Half-automated via a configurable
set-up server
Choose the configuration file and the config-
uration server for the door intercom station to
download this file from the "Auto-provisioning"
section of the web front-end.
Auto-provisioning
GB
37