13
CHAPTER 4
Maintenance and Troubleshooting
Maintaining Your Touch Display
Keep your display and sensor clean
Adjust the display video controls. Refer to Chapter 3 for more information.
Do not install the display in a place where ventilation may be hindered. Always
maintain adequate ventilation to protect the display from overheating and to ensure
reliable and continued operation.
Touch Sensor Care and Cleaning
3M Touch Systems recommends that you periodically clean the glass touch sensor
surface.
Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning
agent for your touch sensor. Be sure to follow solvent manufacturer's precautions and
directions for use when using any solvents.
It is important to avoid using any caustic chemicals on the touch sensor. Do not use
any vinegar-based solutions.
Always dampen the cloth and then clean the sensor.
Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.
Always handle the touch sensor with care. Do not pull on or stress flex tail.
TSD-30219
3M™ MicroTouch™ Display C1500SS Installation Guide
Rev F