Adjusting The Video Display; Controls For Adjusting The Video Display; Osd Controls - 3M MicroTouch C1500SS Guide D'installation

9
CHAPTER 3

Adjusting the Video Display

Controls for Adjusting the Video Display

Your C1500SS Display has five controls for adjusting the video display.
 MENU – Pressing the menu button will call up the On Screen Display (OSD). A
second press will enter the current sub-menu of the OSD. Further presses will allow
you to cycle through the available sub-menu options.
 SELECT -- Return to the previous OSD menu level. If you are at the top level, this
will close the OSD display.
 LEFT -- Decreases the value.
 RIGHT -- Increases the value.
 LED – Indicates whether the display is on.
 POWER – Turns the display on or off.

OSD Controls

Pressing MENU will pull up the On Screen Display menu, as shown below.
TSD-30219
MENU SELECT LEFT RIGHT
Rev F
3M™ MicroTouch™ Display C1500SS Installation Guide
 
LED POWER