MBM FTE74A Manuel D'installation Et D'utilisation page 27

way as to avoid endangering the
safety of the operator in case of
unexpected circumstances
The following are also danger
zones / • All the work areas within
the appliance
• All the areas protected by ap-
propriate safety and protection
systems such as safety photocell
photoelectric curtains, protective
panels, interlocked doors, protec-
tive casing.
• All the zones within the control
units, electrical cabinets and junc-
tion boxes.
• All the zones around the appli-
ance in operation when the mini-
mum safety distances are not be-
ing respected.
EQUIPMENT REQUIRED
FOR INSTALLATION /
The authorised technical opera-
tor, in order to perform the instal-
lation operations correctly, must
respect the following requiremen-
ts: - 3 and 8 mm screwdriver
- Adjustable pipe wrench
- Gas use tools (hosesetc.)
- Electrician's scissors
- Water use tools (hoses etc.)
- 8 mm hex socket wrench
- Gas leak detector
- Tools for electric use (cables,
terminal blocks etc.)
- 8 mm nut driver
- Complete installation set (ele,
gas etc.)
In addition to the tools listed,
an equipment lifting device
is required. This equipment
must comply with all the regula-
tions relating to lifting equipment.
INDICATION ON RESIDUAL
RISK / Even though the rules
for "good manufacturing practice"
and the provisions of law which
regulate manufacturing and mar-
keting of the product have been
implemented, "residual risks" still
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
.
- 7 -
remain which, due to the very na-
ture of the appliance, it has not
been possible to eliminate.
These risks include:
RESIDUAL
ELECTROCUTION / This ri-
sks remains when intervening on live
electrical and/or electronic devices.
RESIDUAL RISK OF BUR-
NING / This risks remains
when unintentionally co-
ming into contact with materials at
high temperatures.
RESIDUAL
BURNS DUE TO LEAKING
OF MATERIAL / This risks
remains when unintentionally co-
ming into contact with materials at
high temperatures. Containers
that are too full of liquids or solids
that during warming change mor-
phology (changing from a solid to
a liquid), can, if used incorrectly,
cause burns. During operations,
the containers used must be pla-
ced on easily visible levels.
RESIDUAL RISK OF CRU-
SHING LIMBS / This risk
exists where there is acci-
dental contact between the parts
during positioning, transportation,
storage and assembly.
RESIDUAL
EXPLOSIONS / This risk re-
mains when:
• there is smell of gas in the room;
• appliance used in an atmosphe-
re containing substances which
risk exploding;
• using food in closed containers
(such as jars and cans), if they
are not suitable for the purpose.
RESIDUAL RISK OF FIRE /
This risk exists by flammable
liquids / material flammable /
use of the equipment as a fryer.
2.
EN
RISK OF
RISK OF
RISK OF