Publicité
Nissan Pathfinder
02/2005 - ....
Ref.
Fitting instructions
1)
Disassemble the bumper en remove the spare wheel.
2)
In the middle of the beam, behind the bumper, are drillings provided. Place the tow bar with points (A)
against the underside of the beam. Insert the bolts and the washers and screw those firmly on (see
tension).
3)
Re-assemble the bumper on the vehicle
4)
Assemble the clutch parts together with the security shackle, insert the bolts and screw these firmly on.
Disassemblage of the bumper
- 2 small screws on the entrance of the trunk
- 2 small screws on the wheel cases
- 2x3 plastic plugs at the bottom of the weel cases
Composition
Tow bar reference 1509
6 bolts M12x90 - DIN931
6 nuts M12 - DIN934
6 security washers M12 - DIN128A
6 washers Ø13 x 24 x 2,5 mm
All bolts and nuts : quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
1509
(A)
(A)
(A)
(A)
Publicité
