Storage Requirements; Prior To Use At Change Of Season - Bosch PAM0520 Mode D'emploi

• Remove the basic filter from the appliance,
Fig. 30.
• Insert the purifying filter + positioner inside
the basic filter as shown on Fig. 32,
remembering that it must be housed on the
lower studs first.
clack!
2
• Install the assembly onto the appliance by
lining the lower studs up with the slots on
the front casing of the appliance and
pressing the top clip in until it clicks into
position. The assembly is fitted properly
when it clicks into position.
• Close the front flap
Warning!
Fit only one set of filters onto the support
in order to ensure correct appliance
operation.
Note
The front flap can also be removed in order
to clean the appliance or change the filters
more easily.
To do this, open the flap up to the safety
stop (the flap opens to a slight angle, Fig.
19) and pull outwards. In order to refit it,
line the lower studs on the flap up with the
holes on the casing until the studs meet
the clips on the casing.
Cleaning and Maintenance
Fig. 32
clack!
1

Storage requirements

When the appliance is out of use for a long
period, set the expulsion tube to parking
position so that the appliance takes up as little
space as possible.
To do this, bend the tube towards the back
of the appliance and secure it with the
diffusion hook. Figs. 33 and 34.

Prior to use at change of season

Clean the air filter.
Clean the casing and the grilles if
necessary.
32
Fig. 33
Fig. 34