Do You Want To Start Dhw Heating - Siemens Synco 700 RMH760B Mode D'emploi

Do you want to start DHW heating?

(Only with RMH760B)
Prerequisites
The heating plant must be commissioned by the heating
engineer.
When the preconditions are met, DHW heating is ready
to be started. Select menu option Preselection and then
select operating mode
and energy-saving operating mode.
The following choices are available:
Symbol Operating mode
Automatic
Normal
Reduced
Protection
16
Building Technologies / HVAC Products
. This is the recommended
Impact on the DHW circuit?
The DHW temperature changes according to the DHW time program,
from normal temperature to reduced temperature, or vice versa
The DHW is maintained at the normal temperature
The DHW is maintained at the reduced temperature
No DHW heating: The plant remains protected against frost however
Path: Main menu > DHW > DHW optg mode > Preselection
CE1B3133x2-en
Guide value
55 °C
40 °C
5 °C
74 319 0560 0 a 10.10.2006