Publicité
Les langues disponibles
Les langues disponibles
TFA_No_60.2517_Anl_D_GB_F_10_16
CUBO - Radio-controlled alarm clock with thermometer
• In areas where no DCF 77 time reception is possible you can deac-
tivate the DCF time reception (position OFF). The clock will then
work as a normal quartz clock (default: ON).
• If the DCF reception is on, the manually set time will be overwritten
by the DCF time when the signal is received successfully.
7.2 Manual setting of alarm clock
• Select your respective alarm function you want with the ALARM
button:
• Set the alarm time in the respective alarm mode.
• Press and hold ALARM button for two seconds.
• The hour digits are flashing.
• Press ▲ or ▼ button to adjust the time you want.
• Confirm with ALARM button.
• Set minutes in the same way.
• Confirm with ALARM button and the alarm is activated
• Press ALARM button again and set time for the second alarm time.
• Press ALARM button again and both alarm times are activated.
26
11.10.2016
18:42 Uhr
Seite 14
.
CUBO - Radio-controlled alarm clock with thermometer
• When the alarm time is reached, the alarm signal will sound and
increase gradually in frequency and the backlight is flashing.
• The respective alarm symbol
alarm by pressing any button.
• You can activate the snooze function by pressing the
SNOOZE/LIGHT button on the top.
• Zz and the respective alarm symbol
alarm will be interrupted for 8 minutes.
• If it is not stopped deliberately, the alarm will automatically turn off
after 2 minutes and the snooze function will be reactivated.
• Press ▲ or ▼ button to activate or deactivate the alarm function.
8. Display
8.1 Indication of time and weekday
• Each press on MODE button will change the display between:
Clock with hour, minutes and seconds
Clock with hour, minutes and day of week
8.2 Indication of time - alarm time
• Each press on ALARM button will change the display between:
Clock with alarm time 1
is flashing. You can stop the
are flashing and the
27
Publicité
