Fein ASCM14 Mode D'emploi page 13

OBJ_BUCH-0000000126-002.book Page 13 Tuesday, March 11, 2014 11:29 AM
Mounting the drill chuck (ASCM18QX,
ASCM14QX, ASCM18QXC, ASCM14QXC)
(figure 3).
Place the drill chuck onto the spindle.
Slide the ring frontwards.
Turn the drill chuck to engage it on the spin-
dle.
Release the ring to lock the drill chuck.
Removing the drill chuck (ASCM18QX,
ASCM14QX, ASCM18QXC, ASCM14QXC)
(figure 4).
Slide the ring frontwards and pull the drill
chuck off the spindle.
Fig. 3
1.
Ring
2.
3.
Sleeve
4.
Fig. 4
Ring
1.
2.
Sleeve
Drill chuck
en
13
Drill chuck