Bimar RD-40F Notice D'instructions page 11

 Always unplug the appliance before you assemble, disassemble or
clean the appliance.
 Do not leave the appliance exposed to the weather (sun, rain, etc.).
 Do not touch the appliance with wet hands or feet.
 Do not pull on the cord to move the appliance.
 Do not pull on the cord or the appliance itself to disconnect the plug
from the plug point.
 If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid risks.
 This appliance must not be operated by means of an external timer
or a separate remote control system, to avoid the risk of fire if the
device is covered and / or is positioned incorrectly. It must also not be
used together with another device that can automatically turn on the
unit, thus avoiding the risk of damage to people, animals or property.
 If the appliance breaks or there is a malfunction, switch off the
appliance and have it checked by qualified personnel; repairs carried
out by unauthorised personnel may be dangerous and nullify the
guarantee.
 Ensure that the fan is switched off from the supply mains before
removing the guard.
INSTALLATION
 After removing the packing materials, check the integrity of the appliance; if you are
unsure, do not use it and ask for qualified professional help. The packing materials (plastic
bags, polystyrene, nails, etc.) must be kept out the reach of children because they are
potential sources of danger. Note: any stickers or advertising material applied to the grille
must be removed before using the appliance.
 Before connecting the appliance, check that the voltage indicated on the data plate
correspond to those of the electricity network. In the event of incompatibility between
11/36