Risk Of Fire; Commissioning; Installation Of The Appliance; Preparing The Appliance - SilverCrest SMW 900 EDS B2 Mode D'emploi

Risk of fire!

NEVER use the grill stand or other metallic objects
when you are using the appliance in the microwave
mode or in the combination cooking process.
Metals reflect the microwave radiation and it leads
to the generation of sparks. This could cause a fire
and irreparably damage the appliance!

Commissioning

Installation of the appliance

Risk of fire!
This microwave oven is not suitable for installation
in a kitchen cabinet. In closed cabinets sufficient
ventilation for the appliance cannot be assured.
The appliance could be damaged and there would
be the additional risk of a fire!
• Select an even surface offering sufficient space
for the adequate ventilation of the appliance:
Ensure that you maintain a minimum distance
of 10 cm from neighbouring walls/surfaces.
Make sure that the door of the microwave
oven can be opened easily.
Maintain a gap of at least 20 cm above the
microwave oven.
• Ensure that the electrical plug is accessible
without problem, so that in case of danger it
can be easily reached and removed.
• Do not remove the pads underneath the micro-
wave oven.
Do not block the ventilation openings 5. If you
•
do, it could cause damage to the appliance.
• Install the appliance as far away as possible
from radios and televisions. The operation of
the microwave oven can cause malfunctions of
radio and televsision reception.
Warning:
Do not install the microwave above a cooker or any
other appliance generating heat. Installation at such
a location could cause damage to the appliance
and thereby a subsequent lapse of the warranty
provisions.

Preparing the appliance

• Remove the packaging material and the pro-
tective film applied to the panel and the door
opener button 2.
Do not remove the light grey flimmer
cover plate, which is mounted in the
cooking compartment to protect the
magnetron.
• Insert the plug into a mains power socket. Use a
230 - 240 V ~ , 50 Hz, mains power socket
with a 16 A fuse. We recommend that the
microwave is powered by its own mains circuit.
If you are unsure about how to connect the mi-
crowave oven, consult a specialist.
Before the first regular usage of the microwave oven
the appliance must be heated up to remove any re-
maining production residues.
Once you have plugged the plug into the socket,
open the microwave door once by pressing the
Door opener button 2.
Switch the appliance on in grill operating mode
without foods and without accessories (turntable 3
and grill stands t):
- 115 -