Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
RF-DAB-Pocket1 Pocket DAB Radio
Item no. 1620627
Intended use
The RF-DAB-Pocket1 Pocket DAB Radio is used to receive radio stations in private domain. It is not intended
for commercial use.
The device may only be used in closed rooms and protected outdoor areas. Contact with moisture, for
example in bathrooms or the like, must be avoided.
For safety and approval reasons, you may not convert and/or alter the product in any way. If you use the pro-
duct for other purposes than those described above, the product may be damaged. Furthermore, improper
use can cause risks such as short-circuits, fire, etc. Please read the operating instructions carefully and do
not discard them. Please include these operating instructions when you pass the product on to a third party.
This product complies with the applicable national and European Regulations. All company names and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• Pocket DAB Radio
• Headset
• USB cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code.
Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in these operating instructions
which absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Please read the operating instructions carefully and pay particular attention to the safety
instructions. We do not assume liability for injuries/material damages resulting from fail-
ure to observe the safety instructions and the information in these operating instructions
regarding the proper handling of the product. Furthermore, in such cases, the warranty/
guarantee will be null and void.
a) General
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly cast aside the packaging material. It may become a dangerous plaything
for children.
• Do not use the product while driving a vehicle, operating machinery, or performing other po-
tentially hazardous activities. You may not hear warning signals and thus expose yourself to
danger.
• When using the product during sports activities or as a pedestrian, adjust the volume so that
you are still able to hear the sounds produced by your surroundings.
• Do not listen to excessively loud music over long periods of time. This may damage your
hearing.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations, high humi-
dity, moisture, combustible gases, vapours and solvents.
• If safe operation is no longer possible, take the device out of service and secure it against
unintended use. Safe operation is no longer possible, if the product:
- shows visible signs of damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of time or
- has been exposed to considerable strain during transport.
• If you have doubts about how the product should be operated or how to safely connect it,
consult a qualified technician.
• Maintenance, adjustment and repair work should only be carried out by an expert or a specia-
lised workshop. If you have any questions that are not answered in these operating instruc-
tions, please contact our technical customer service or other professionals.
b) Battery
• The built-in battery cannot be removed and is charged while in the device. Do not attempt to
remove the battery to charge it with an external charger.
• Use only the USB interface of a USB power supply or a USB port of a computer to charge
the battery. A different charging current will damage the equipment and cause the built-in
rechargeable battery to overheat or ignite (risk of explosion!).
Operating controls
1
ON/OFF Switch
2
Headset socket
3
Display
4
STANDBY/MODE button
5
ENTER/LOCK button
6
◄ button
7
VOL- button
8
DC 5V IN socket
9
► button
10 VOL+ button
11 MENU/INFO button
Charging the built-in rechargeable battery
The USB connection at which the device is charged must have a power rating of at least
500 mA. This is normally assured at every USB connection of computers. However, the device
can also be charged with power supplies that feature USB ports.
Before using the device for the first time, the built-in rechargeable battery must be fully charged.
Charging takes about 3 hours.
Charge the battery at least once a month even if the device is not in use. This protects the
battery from damage due to total discharge and prolongs the battery life. Do not, under any
circumstances, go for more than 10 months without charging the battery.
• Connect the included USB cable to the DC 5V IN socket (8).
• Plug the other end of the USB cable into the USB port of a computer or into a suitable USB power supply.
• Switch on the device by sliding the ON/OFF switch (1) to the ON position.
• During the charging process, the battery status indicator flashes on the display (3).
• Once the rechargeable battery is fully charged, the battery status indicator shows the full battery symbol
on the display (3).
• Unclip the USB cable when the charging process is complete.
• The operating time with fully charged battery is about 8 hours with medium volume. Once the rechargeable
battery is discharged, the battery status indicator shows the empty battery symbol on the display (3).
Connecting the headset
Insert the headset plug into the earphone socket
The headset cable simultaneously serves as the antenna for radio reception. Therefore, the
headset must be always inserted to ensure flawless reception.
Operation
a) General operation
Switching on or off
• In order to turn on the device, slide the ON/OFF switch (1) to the ON position.
• In order to turn off the device, slide the ON/OFF switch (1) to the OFF position.
The device can be switched off completely by the ON/OFF button (1). Use this function, if the
device is not used for a long period of time to save the battery power.
• After switching it on for the first time, the menu language must be selected. Select the desired language
using the ◄ (6) or ► button (9) and press the ENTER/LOCK button (5) briefly.
• The device then performs an automatic scan in the DAB reception range.
During the scan, the display (3) shows the progress and the number of the stations found.
On completion of the channel scan, the first item in the station list will be played back. If no
channels were found, it means that no signal was received. In this case, change the device
location or headset (serving as an antenna) orientation and repeat the channel scan. Make sure
the DAB stations are broadcasting in your area.
The signal strength is shown in the top right display (3) area.
Once switched on again, device operates in the most recently chosen mode.
• Press and hold the STANDBY/MODE button (4) to switch the device to the standby mode.
In the standby mode, the display (3) shows time and battery status. Use the standby mode if you
do not require the device for a short period.
1
2
3
4
5
6
Enter/Lock
7
8
(2).
11
10
9
Publicité
