DeFelsko PosiTector UTG Notice D'instruction page 12

Reset
Reset (menu reset) restores factory settings and returns the
Gage to a known condition. The following occurs:
- All batches, stored measurements, batch names and screen
captures are erased.
- All calibration adjustments are cleared and returned to the
Gage's factory calibration settings.
- Menu settings are returned to the following:
Memory = OFF
Statistics = OFF
Hi Lo Alarm = OFF
Min Scan = OFF
Reading Tick = ON
Perform a more thorough Hard Reset as follows:
1. Power down the Gage and wait 5 seconds.
2. Simultaneously press and hold the
Reset symbol
This returns the Gage to a known, "out-of-the-box" condition. It
performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following:
Units = Millimeter
Touch = ON
Flip Lock = OFF
Auto Sync .net = ON
Sound = Medium
NOTE:
Date, Time and WiFi settings are not affected by either Reset.
Setup Menu
Auto Dim = ON
A Scan = OFF
B Scan = OFF
Cal Lock = OFF
SE Mode = OFF
appears.
Battery Type = Alkaline
Language = English
Backlight = Normal
Bluetooth = OFF
USB Drive = ON
10
SmartCouple = OFF
Bluetooth Classic = OFF
WiFi & Access Point = OFF
Keyboard & Stream = OFF
and buttons until the