IMG STAGELINE MFX-16M Mode D'emploi page 8

Multi-Effect Unit
These operating instructions are intended for users
with basic knowledge in audio technology . Please
read the instructions carefully prior to operation and
keep them for later reference .
All operating elements and connections de-
scribed can be found on the fold-out page 3 .
1 Overview
1 Control INPUT LEVEL to match the input level
2 Overload LED CLIP; if the LED lights up, turn back
the control INPUT LEVEL (1) accordingly
3 Control MIX for the effect intensity:
– In the position DIRECT, only the original direct
signal will be audible .
– In the position EFFECT, only the effect signal
will be audible .
– In the intermediate positions, both signals will
be mixed .
4 Control OUTPUT LEVEL to adjust the output level
5 Control FX VARIATION to adjust various effect
parameters (
☞
6 Button TAP/ F1 to switch the control FX VARIA-
TION to the setting of a second effect parameter
for certain effects (
chapter 5)
For the effect DELAY, press the button repeatedly
to define the delay time; the interval between
the last two actuations will define the delay time
(1 .3 sec . max .)
7 Selector switch EFFECT SELECT to select an effect
8 Button BYPASS / F2
1 . To activate / deactivate the effect signal; when
the effect signal has been deactivated, only
the original signal adjusted with the control
MIX (3) will be sent to the outputs
2 . For the effect ROTARY, press the button to
stop and restart the simulated rotation of a
speaker .
3 . For the effect DELAY/ REV, press the button and
the button TAP/ F1 (6) to switch the control FX
VARIATION (5) to the setting of a third and
fourth parameter (
9 Power LED
10 POWER switch
11 Jack to connect the power supply unit provided
12 Signal outputs (6 .3 mm jack, unbal .) to connect
the inputs of the subsequent audio unit
8
table on page 3)
table on page 3 and
☞
chapter 6 .5) .
☞
13 6 .3 mm jack FOOTSWITCH to connect a foot-
switch for remote control of the function of the
button BYPASS / F2 (8)
14 Mono signal input (6 .3 mm jack, unbal .) to con-
nect a signal source (audio unit with line output)
2 Safety Notes
The units (effect unit and power supply unit) cor-
respond to all relevant directives of the EU and are
therefore marked with
WARNING The power supply unit uses danger-
ous mains voltage . Leave servicing
to skilled personnel only . Inexpert
handling may result in electric
shock .
•
The units are suitable for indoor use only . Protect
them against dripping water and splash water,
high air humidity and heat (admissible ambient
temperature range 0 – 40 °C) .
•
Disconnect the power supply unit from the socket
immediately
1 . if one of the units is visibly damaged,
2 . if a defect might have occurred after a unit
was dropped or suffered a similar accident,
3 . if malfunctions occur .
In any case the units must be repaired by skilled
personnel .
•
For cleaning only use a dry, soft cloth; never use
water or chemicals .
•
No guarantee claims for the units and no liability
for any resulting personal damage or material
damage will be accepted if the units are used for
other purposes than originally intended, if they
are not correctly connected or operated, or if they
are not repaired in an expert way .
If the units are to be put out of operation
definitively, take them to a local recycling
plant for a disposal which will not be
harmful to the environment .
3 Applications
The MFX-16M is a digital effect unit with 16 different
effects, e . g . Delay, Reverb, Gated Reverb, Chorus,
Flanger, etc . and various effect combinations . In an
audio system, the effect unit is used to modify the
sound . It is inserted in the signal path, e . g . in the
effect way of a mixer . Due to its compact design,
the MFX-16M is suited for versatile applications .
.