Télécharger Imprimer la page

Melnor Aqua Timer 3060 Mode D'emploi page 13

Publicité

Les langues disponibles

Les langues disponibles

The Mist Cycle options include the following.
NO
= There is no mist cycle.
2 min = The timer waters for two minutes, stops for ten minutes, then repeats
5 min = The timer waters for five minutes, stops for ten minutes, then repeats
10 min = The timer waters for ten minutes, stops for ten minutes, then repeats
15 min = The timer waters for 15 minutes, stops for ten minutes, then repeats
When will the watering begin?
The schedule begins as soon as you complete the programming. However, the
Aqua Timer
will only begin watering at a specified start time.
Example A:
If you program your timer at 9:00 a.m. to water daily from 8:00 a.m. to 10:00
a.m., the timer will begin watering the following morning at 8:00 a.m., the next
specified start time.
Example B:
If you program your timer at 6:00 a.m. to water daily from 8:00 a.m. to 10:00
a.m., the timer will begin watering that morning at 8:00 a.m., the next specified
start time.
10

Publicité

loading

Produits Connexes pour Melnor Aqua Timer 3060