Melnor Aqua Timer 3060 Mode D'emploi page 11

To water on specific days
1. After programming the Mist Cycle, the unit will begin flashing a small arrow
beside WATER DAYS. Press the RIGHT CURSOR
ing days. "SU" (Sunday) will begin flashing. If you wish to water on
Sundays, simply press the ACCEPT
"MO" (Monday) will begin flashing. If you do not want to water on Sunday,
press the RIGHT CURSOR
"SU" disappears.
Continue in this fashion and program the remaining days. If you change
your mind, you can use the LEFT
to a day and change its setting.
2. The unit will proceed to USER SET (schedules). The numeral 1 will be blink-
ing. To save this program as program 1, simply press ACCEPT
Otherwise, use the RIGHT CURSOR
to use as a reference for this program, and press ACCEPT
save the program. Otherwise, the program will run only once.
To skip watering days
1. After programming the Mist Cycle, the unit will begin flashing a small arrow
beside WATER DAYS. Press the ACCEPT
arrow will move to the skip days area.
2. Use the RIGHT CURSOR
skip between waterings and then press the ACCEPT
key and "SU" will become solid and
key to move to Monday. You will notice the
and RIGHT CURSOR
key to move to the numeral you wish
key to select the number of days you want to
8
key to begin choos-
keys to move
. You must
key once and the small
key.
.